Ambrogio L60 Elite S+ handleiding
Handleiding
Je bekijkt pagina 20 van 32
20
User’s manual
EN
STARTING THE ROBOT WITH THE SENSORS TURNED OFF
In certain lawn conditions, the robot can be started with the lawn and curb drop-off sensors deactivated, which means the robot
can be started when lawn conditions are such that correct functions are not guaranteed, for example with very short or patchy
grass.
This mode requires very special attention from the user, and the dealer should be consulted before attempting to operate in this
mode.
When the robot is on Pause, these modes can be activated following this procedure (the robot with the sensors deactivated
according to the modes described below can also be started using your smartphone):
Grass Sensor Off – Curb drop-off sensor On:
Press the “START/PAUSE” button and keep it pressed for 4
seconds until 2 consecutive beeps are heard and the PAUSE led
ashes twice. This mode must only be used on models with the
curb drop-off sensor installed, and it allows working with just the
4 curb drop-off sensors. This mode is recommended in gardens
where the lawn is lower than the sensors but still very uniform.
GULF
5 cm / 1,9 "
5 cm / 1,9 "
With the curb drop-off sensor installed,
minimum width
GRASS SENSOR OFF - CURB DROP-OFF SENSOR ON
Keep the “START/PAUSE”
button pressed for 4 seconds.
Release the button
Wait for
2 beeps 2 flashes
+
4 sec.
Bekijk gratis de handleiding van Ambrogio L60 Elite S+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ambrogio |
| Model | L60 Elite S+ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5177 MB |
