Ambrogio L60 Elite S+ handleiding
Handleiding
Je bekijkt pagina 18 van 32
18
User’s manual
EN
START-UP
1. Check that the grassy surface of the lawn to mow is at a
height which is compatible with the proper functioning of
the robot (see technical specications).
2. Adjust the desired cutting height (see cutting height
adjustment).
3. Check that the work area is correctly delimited and that
there are no impediments to the correct functioning of the
robot as indicated in the section “Preparation and dening
the boundaries of the work areas” and following sections.
4. Position the robot near the charging zone.
5. Lift the door of the charging connector. Insert the charging
connector. Once connected, the robot turns on automatically
and displays the battery charge level (see “meaning of led
combination”).
6. At the end of charging, disconnect the robot and press the “ON/OFF” button. On rst use, always charge the batteries for at
least 4 hours.
7. Position the robot inside the grassy surface in an area where the grass is at least 1 metre (40.00 ") from any obstacle.
8. Press the “OFF/ON” key and wait a few seconds for the robot to turn on completely.
9. Press “START/PAUSE” key to start the robot.
Once the robot has stopped due to the reasons described in the chapter “Robot Stop”, activate the safety stop and reposition the
robot inside the power supply unit for recharging.
Important
For a better cutting performance and correct functioning of the recognition sensor, do not start the robot in case of
rain or in very humid conditions. The best results are obtained in the middle of the day.
Bekijk gratis de handleiding van Ambrogio L60 Elite S+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ambrogio |
| Model | L60 Elite S+ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5177 MB |
