Ambient Lockit+ handleiding

Handleiding

123456789101112131415161718192021222324252627/ 27

Afdrukken

Je bekijkt pagina 15 van 27

15Lockit+ Users Manual |

9.2 ACN Settings

Monitor and manage all Lockits within the selected ACN channel.

• “Your Lockit+”

• Start C-Jam master

• Select ACN channel

• Rename unit

• ACN Radar

• Check status of connected devices (online/oine)

• Grid view and list view of ACN devices

- Online / oine

- Rename units

- Battery status

- Timecode aberration

• Project tune devices

Note: If you want to re-calibrate your Lockit Setup after some years of operation,

you can perform a Project Tune (former feature of the discontinued ACC controller).

All Lockits within the selected ACN Channel will be tuned simultaneously.

The process will take approx. 2 minutes during which the devices will rapidly blink

red and green.

Tune value will be overwritten by the factory value on a factory reset.

Attention: NEVER initiate a Project Tune during a shoot. There will be a hard reset

of the sync pulse when the process is nished. This will potentially bring cameras

in operation out of clock and compromise active recordings.

123456789101112131415161718192021222324252627/ 27

Bekijk gratis de handleiding van Ambient Lockit+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd