Handleiding
Je bekijkt pagina 8 van 20
8
(3.1) Rear Panel
A. Power
Use the included power cable to connect this input to a power outlet. Make sure the P
ower Switch is set
to o when connecting or disconnecting the cable.
B
. Fuse
If the unit’s fuse is broken, lift this tab to replace the fuse. Replace it with a fuse with an appropriate
rating (printed next to the unit’s power cable input). Using a fuse with an incorrect rating can damage
the unit and/or fuse.
C
. Power Switch
Use this switch to power the loudspeaker on or o. Make sure the V
olume knob is set to its minimum
(counterclockwise) position before turning it on.
D
. Cooling Vent
Keep the area in front of this vent clear from obstructions.
E
. Signal/Limit LED
This light illuminates when a high audio signal level activates the internal protection circuit. The protection
circuit dynamically reduces the signal level to avoid audible distortion and to protect the woofer and high-
frequency driver from over-excursion or mechanical damage. If this light is lit constantly, or the sound is
distorted, reduce the signal level of your sound source, or lower the channel’s V
olume knob.
(3.0) FEATURES
K
L
M
Bekijk gratis de handleiding van Alto TX412, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alto |
| Model | TX412 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 2077 MB |
