Alto-Shaam VMC-H2 DELUXE handleiding
Handleiding
Je bekijkt pagina 41 van 92
INSTALLATION
Vect or H™ Seri es ▪ Ope rato r’s Man ual ▪ MN-462 95 ▪ R ev 1 ▪ 1 1/19
41
Continued from previous page
Install wheels on
lower oven
To install the casters on the lower oven, do the following.
4. Attach each caster with fasteners as shown.
5. Level the unit as necessary. To do so, screw the wheel up or down until the
unit is level. Tighten the jam nut
c.
Slide a piece of the tubing d over the exposed screws if more than 1/4-
inch of thread is exposed.
Attach wire tie e around the tubing to hold it in place.
Install the tether 6. Install the tether to the lower oven. Install the tether so that no stress is
transmitted to the electrical cord when the oven moves.
Result The oven is now installed to the stand.
VMC-TS-008006
VMC-TS-008009
c
d
e
VMC-TS-006893
Bekijk gratis de handleiding van Alto-Shaam VMC-H2 DELUXE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alto-Shaam |
| Model | VMC-H2 DELUXE |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 13081 MB |
