Alto-Shaam VMC-F3E handleiding
Handleiding
Je bekijkt pagina 89 van 96
MAINTENANCE
Vector™ F Series ▪ Operator’s Manual ▪ MN-39279 ▪ Rev 01 ▪ 1/18
89
Continued from previous page
Monthly cleaning
procedure
To clean the oven monthly, do the following.
Step Action
1. Set the main disconnect switch to the OFF position.
Make sure the oven is cool—chambers are less than 140°F (60°C).
Remove the cooking racks a and jet plates b.
2. Separate the jet plates.
Spray the jet plates with EcoLab Greaselift™ or Chemco Dirt Buster III™ c
oven cleaner. Let the cleaner work for 3–5 minutes.
3. Wipe the jet plates with a non-abrasive nylon scrub pad.
4. Spray the inside walls of the oven with EcoLab Greaselift™ or Chemco Dirt
Buster III™ oven cleaner. Let the cleaner work for 3–5 minutes.
5. Wipe the inside walls of the oven with a non-abrasive nylon scrub pad.
6. Re-install the jet plates and cooking racks.
Continued on next page
CAUTION: Personal injury hazard.
Use hand protection when handling the jet plates.
NOTE: Make sure the jet plates are installed correctly.
The nozzles on the jet plates should be pointing towards
the food.
VMC-TS-003168
a
b
c
Bekijk gratis de handleiding van Alto-Shaam VMC-F3E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alto-Shaam |
| Model | VMC-F3E |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 13130 MB |
