Alto-Shaam VMC-F3E handleiding
Handleiding
Je bekijkt pagina 87 van 96
MAINTENANCE
Vector™ F Series ▪ Operator’s Manual ▪ MN-39279 ▪ Rev 01 ▪ 1/18
87
AINTENANCE
How to Clean the Oven
Before you begin
Make sure that the oven is turned off and cool—chambers are less than 140°F
(60°C).
Daily cleaning
procedure
To clean the oven daily, do the following.
Step Action
1. Remove any spills with disposable paper wipes or a damp cloth.
2. Wipe the outside of the oven with a damp cloth.
3. Wipe the outside of the oven with a stainless steel cleaner.
Continued on next page
WARNING: Electric shock hazard.
Set the main disconnect switch to the OFF position to remove
electric power from the appliance.
CAUTION: Burn hazard.
Allow the oven, utensils, and racks to cool before cleaning.
CAUTION: Corrosive materials hazard.
Wear eye protection and hand protection when cleaning.
NOTICE
Using improper cleaning procedures could damage the
catalyst and void the warranty.
Only use spray cleaner when the electric power is completely
removed from the oven.
Do not spray the catalyst with water or cleaning solution.
Do not spray cleaner into the oven while the recirculation
blower is running.
Do not use steel pads, wire brushes, or scrapers when
cleaning.
Bekijk gratis de handleiding van Alto-Shaam VMC-F3E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alto-Shaam |
| Model | VMC-F3E |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 13130 MB |
