Alto-Shaam AR-7H handleiding
Handleiding
Je bekijkt pagina 9 van 32
AR-7H Hot Holding Rotisserie Companion Operation & Care Manual • 7
InstallatIon
AR-7H Hot Holding Rotisserie Companion Operation & Care Manual • 7
stackInG InstructIons
The holding cabinet can be stacked with an
identical holding cabinet or a matching rotisserie
oven in either the top or bottom position.
Only screws, lock washers, and hex nut are
required to fasten units together when stacking
a rotisserie on top of a matching holding cabinet
or a holding cabinet on top of a holding cabinet.
Additional stacking hardware is required for all
other combinations (see previous page).
All fastening holes have been prepunched. If
the rotisserie oven is positioned at the bottom of a
stacked configuration, make certain the oven is on a
non-combustible surface. The stacking combination
also requires the minimum clearance of 6" (152mm) at
the back and both sides.
1 Remove the two side access panels of both units.
2 Carefully lift and place the upper unit into
position aligning on bottom unit.
3 Secure units together by inserting a hex head
screw, a flat washer, and a lock washer in each
hole of the top unit and screwing them into the
inserts provided on the top of the lower unit.
Securely tighten all four screws.
4 Replace the side panels on both units.
A
DETAIL A
2
3
3
4
1
A
DETAIL A
2
3
3
4
1
AR-7H oveR AR-7H Holding cAbinet stAcking Assembly (5009711)
item
no.
pARt
no.
pARt descRiption qty
1 NU-2437 NUT, 1/4-20 HEX S/S 4
2 SC-27385 SCREW, 1/4-20 X 3/4" LG HEX HEAD 4
3 WS-22094 WASHER, 1/4", FLAT, 5/8 OD 18-8 SS 8
4 WS-2294 WASHER 1/4" SPLIT 4
Bekijk gratis de handleiding van Alto-Shaam AR-7H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alto-Shaam |
| Model | AR-7H |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5254 MB |
