Alto-Shaam 300-S handleiding
Handleiding
Je bekijkt pagina 19 van 56
MN-29423 • Rev 6 • 02/18 • S-Series Hot Food Holding Cabinets 19
Electrical Connection
CAUTION
Power source must match voltage identified
on appliance rating tag. The rating tag
provides essential technical information
required for any appliance installation,
maintenance or repairs. Do not remove,
damage or modify the rating tag.
This section is provided for the assistance of
qualified and trained service technicians only
and is not intended for use by untrained or
unauthorized service personnel. Failure to
observe this precaution may void the warranty.
WARNING
To prevent serious injury, death, or
property damage:
All electrical connections must be
made by a qualified and trained service
technician in accordance with applicable
electrical codes.
This appliance must be adequately
grounded in accordance with local
electrical codes or, in the absence of local
codes, with the current edition of the
National Electrical Code ANSI/NFPA No.
70. In Canada, all electrical connections
are to be made in accordance with CSA
C22.1, Canadian Electrical Code Part 1 or
local codes.
CE‑approved appliances include an
equipotential‑bonding terminal marked
with the symbol shown on the le .
Provisions for earthing are to be made in
accordance with IEC:2010 60335‑1 section
27 or local codes.
NOTE: A rating tag is permanently mounted on
theappliance. Ensure power source matches the
voltage identied on the tag.
Plug appliance into a properly grounded receptacle only,
positioning the appliance so the power supply cord is easily
accessible in case of an emergency.
Arcing will occur when connecting or disconnecting the
appliance unless the controller is OFF.
NOTICE: Where local codes and CE regulatory
requirements apply, appliances must be
connected to an electrical circuit that is
protected by an external GFCI outlet.
Hard wired models:
Hard wired models must be equipped with a country
certi ed external allpole disconnection switch with
suf cient contact separation.
If a power cord is used for the connection of the product an
oil resistant cord like H05RN or H07RN or equivalent must
be used.
Bekijk gratis de handleiding van Alto-Shaam 300-S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alto-Shaam |
| Model | 300-S |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8939 MB |
