Alto-Shaam 1000-BQ2/96 handleiding
Handleiding
Je bekijkt pagina 18 van 34
MN-29578 (Rev. 5) 10/16 • 1000-BQ2 Banquet Cart • 16
The electronic thermostat is a precise instrument and is
designed to offer trouble free service. If you suspect the
temperature inside the holding compartment does not
match the temperature indicated on the digital display,
follow the instructions listed below.
1. Check to make certain the unit voltage matches
the power source. A power source less than that
required to operate the unit will result in inaccurate
temperatures.
2. Verify the temperature inside the holding
compartment with a qualify thermal indicator.
A. With the exception of the wire shelves,
completely empty the holding compartment.
B. Make certain the holding cabinet sensor,
located inside the holding compartment at the
left side of the unit, is completely clean.
C. Suspend the thermal indicator in the center of
the holding compartment.
D. Allow the temperature set on the electronic
thermostat to stabilize for a minimum of one
hour before comparing the digital display
with the reading on the thermal indicator.
Do not open the cabinet door(s) during the
temperature stabilization period.
If the reading on the thermal indicator does not match
the digital display, there may be a problem with the air
sensor. See troubleshooting guide in this manual; or call
the factory service department for advice.
THERMOSTAT ACCURACY
SERVICE
This section is provided for the assistance
of qualified and trained service
technicians only and is not intended
for use by untrained or unauthorized
service personnel. Failure to observe this
precaution may void the warranty.
DANGER
To prevent serious injury, death, or property
damage, always lock-out or post breaker
panel until service work has been completed.
TROUBLESHOOTING
NOTICE
This section is provided for the assistance of qualified and trained service technicians only and is not
intended for use by untrained or unauthorized service personnel. Do not attempt to repair or service the
oven beyond this point. Contact Alto-Shaam for the nearest authorized service agent. Repairs made by
any other service agents without prior authorization by Alto-Shaam will void the warranty.
Always check the circuit breaker is turned “On” and your unit is receiving power before calling your
Authorized Alto-Shaam Service Agent.
Service Thermostat Accuracy Troubleshooting
Bekijk gratis de handleiding van Alto-Shaam 1000-BQ2/96, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alto-Shaam |
| Model | 1000-BQ2/96 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5405 MB |
