Alto-Shaam 1000-BQ2/96 handleiding
Handleiding
Je bekijkt pagina 13 van 34
MN-29578 (Rev. 5) 10/16 • 1000-BQ2 Banquet Cart • 11
1. Preheat at 200°F for 30 minutes.
Allow a minimum of 30 minutes for preheating before
loading the banquet cart with product.
2. Load the cart with hot food only.
The purpose of the banquet cart is to maintain hot
food at proper serving temperature. Only hot food
should be placed into the banquet cart. Before
loading the cart with food, use a food thermometer
to make certain all products have reached an internal
temperature range of 140°F to 160°F (60°C to 71°C).
Any food product not within the proper temperature
range should be heated before loading into the
banquet cart. For best results, use a Halo Heat Low
Temperature Cooking and Holding Oven set at 250°F
to 275°F (121°C to 135°C), or a Combitherm oven,
to bring the product within the correct temperature
range.
3. Load covered plates or carriers into the
banquet cart.
After the food has reached proper serving
temperature:
A. Use heated plates only.
B. Load each series of four (4) plates into the banquet
cart as soon as assembled and as quickly as possible
to retain maximum heat.
C. Load the plates in the upper section of the banquet
cartrst.
D. Securely close the door(s) of the banquet cart after
loading.
4. Reset the thermostat to desired
temperature.
Afterthecarthasbeencompletelylledwithproduct,
check to make certain the doors are securely closed,
and reset the thermostat to the desired holding
temperature or the suggested 180°F (82°C).
The proper temperature range for the products
being held, and whether or not to open or close the
door vents, will depend on the type and quantity of
product. When holding food for prolonged periods,
it is advisable to periodically check the internal
temperature of each item with a food thermometer to
assure maintenance of the proper temperature range
of 140°F to 160°F (60°C to 71°C).
5. Unload covered plates, trays or plate
carriers as needed.
A. Unload the items from the lower section of
thecartrst,andworkuptowardthetop
of the cart.
B. Securely close the door(s) of the cart after each
product removal.
OPERATION
HOLDING PROCEDURE
I
o
I
o
I
o
I
o
I
o
I
o
I
o
I
o
On/Off Power
Switch
Digital
Display
Up/Down
Arrow Keys
Heat
Indicator Light
Temperature
Display Key
Holding Procedures
Bekijk gratis de handleiding van Alto-Shaam 1000-BQ2/96, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alto-Shaam |
| Model | 1000-BQ2/96 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5405 MB |
