Alto-Shaam 1000-BQ2/192 handleiding
Handleiding
Je bekijkt pagina 12 van 34
MN-29578 (Rev. 5) 10/16 • 1000-BQ2 Banquet Cart • 10
1. Preheat at 200°F (93°C) for 30 minutes before
loading food.
Push power switch to “On” position. The unit will
begin operating at the previous set temperature.
2. Press the Up or Down Arrow Keys to 200°F (93°C).
Pressing and releasing the Arrow Keys will increase
the set point by 1 degree. Pressing and holding the
Arrow Key will increase set point by 10 degrees.
When Arrow Key is released, a new set point
temperature is set. The Set temperature will appear in
the Digital Display and the Heat Indicator Light will
illuminate. Press the Temperature Display Key for
three seconds at any time to display the Actual inside
air temperature.
To toggle between Set and Actual:
Factory default is to display Set temperature in the
Digital Display. To display Actual temperature:
Press and hold the Temperature Display Key and
the Up Arrow Key for 5 seconds. The control will
show
ACT
, then show the Actual temperature.
Repeat to toggle to Set point
SET
.
Press the Temperature Display Key at any time to
display the alternate temperature.
3. When the inside air temperature reaches the desired
holding temperature, the Heat Indicator Light will
turn off.
4. Load the cabinet with hot food only.
The purpose of the holding cabinet is to maintain hot
food at proper serving temperatures. Only hot food
should be placed into the cabinet. Before loading
the unit with food, use a food thermometer to make
certain all food products are at an internal temperature
range of 140°F to 160°F (60°C to 71°C). All food not
within the proper temperature range should be heated
before loading into the holding cabinet.
5. Check to make certain the cabinet door is securely
closed, and using the Up and Down Arrow Keys, set
the temperature to 160°F (71°C).
This will not necessarily be the nal setting.
The proper temperature range for the food being held
will depend on the type and quantity of product.
Whether or not the door vents should be open or
closed will also depend on the type of food being
held. When holding food for prolonged periods, it is
advisable to periodically check the internal temperature
of each item to assure maintenance of the proper
temperature range. Reset the holding temperature
accordingly.
To Toggle between fahrenheit and Celsius
Press the Temperature Display Key at any time to display
the alternate temperature.
The factory default is Fahrenheit. To change to Celsius:
1. Press and hold the Temperature Display Key and the
Down Arrow Key for 5 seconds.
2. The control will show
.
C
for 3 seconds to verify
selection and then show the temperature. (Set Point or
Actual, whichever the user has selected) in ºC.
3. Repeat to toggle to Fahrenheit.
NOTICE: With a power failure, factory test, etc., the
control will retain the ºC or ºF setting selected
by the user when power is restored.
OPERATION
OPERATING INSTRUCTIONS
I
o
I
o
I
o
I
o
I
o
I
o
I
o
I
o
On/Off Power
Switch
Digital
Display
Up/Down
Arrow Keys
Heat
Indicator Light
Temperature
Display Key
Operation Operating Instructions
Bekijk gratis de handleiding van Alto-Shaam 1000-BQ2/192, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alto-Shaam |
| Model | 1000-BQ2/192 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5405 MB |
