Alpine TMI-M990 handleiding
Handleiding
Je bekijkt pagina 67 van 71
64-EN
Installation and Connections
1
System Switch
Change to “1:SYSTEM” when the main unit is connected with an IONBUS compatible head
unit.
When not connected to an IONBUS compatible head unit, change to “2:STANDALONE”.
• Be sure to turn the power off to the unit before changing the switch position.
2
Power Supply Connector
3
AUX Video/Audio Output (AUX2) Terminal
Use when connecting an optional monitor etc.
4
AUX Video/Audio Output (AUX1) Terminal
Use when connecting an optional monitor etc.
5
AUX Video/Audio Input (AUX1) Terminal
6
AUX Video/Audio Input (AUX2) Terminal
7
AUX Video Input (AUX3) Terminal
Use when connecting a back-up camera.
8
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead outputs the controlling signals
from the remote control.
9
RCA Extension Cable (Sold separately)
p
Reverse Lead (Orange/White)
Connect to the plus side of the car's reverse lamp which lights when the transmission
is shifted into reverse (R).
Switches the video picture to the back-up camera. This is linked to putting the car into
reverse (R).
q
Remote Control Input Lead (White/Brown)
* Connect to AUX-3 when connecting a back-up camera.
Set AUX-3 NAME to CAMERA.
(Refer to “Name External Equipment to be Displayed (AUX)” Page 45.)
• When connecting with the IONBUS compatible head unit, do not connect the ignition lead.
Bekijk gratis de handleiding van Alpine TMI-M990, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alpine |
| Model | TMI-M990 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7874 MB |
