Alpine TMI-M990 handleiding
Handleiding
Je bekijkt pagina 64 van 71
61-EN
1
IONBUS cable
Used when setting up IONBUS compatible products.
2
IONBUS terminal
Used when setting up IONBUS compatible products.
3
IONBUS cable (Included)
4
Monitor Extension Cable (Included)
5
Reverse Lead (Orange/White)
Use only when a back-up camera is connected. Connect to the plus side of the car's reverse
lamp that lights when the transmission is shifted into reverse (R).
Switches the video picture to the back-up camera. This is linked with putting the car into
reverse (R).
6
Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the parking brake switch to transmit the
parking brake status signals to the TMI-M990.
7
Connect this lead to the parking brake lead powered when parking brake is
engaged.
8
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse box or another unused power
source which provides (+) 12V only when the ignition is turned on or in the accessory
position. When connecting with the IONBUS compatible head unit, do not connect the
ignition lead.
9
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle's battery.
p
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle. Make sure the connection is
made to bare metal and is securely fastened using the sheet metal screw provided.
q
Choke Coil with Fuse Holder (7.5A)
w
Power Supply Connector
e
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead outputs the controlling signals
from the remote control.
r
Remote Control Input Lead (White/Brown)
Connect the external Alpine product to the remote control output lead.
t
Display Output Terminal
y RGB Input Terminal
u
S Video Input Terminal
i
AUX Input Terminals/AUX Output Terminals
o
System Switch
Change to “1:SYSTEM” when the main unit is connected with an IONBUS compatible head
unit.
When not connected to an IONBUS compatible head unit, change to “2:STANDALONE”.
• Be sure to turn the power off to the unit before changing the switch position.
Bekijk gratis de handleiding van Alpine TMI-M990, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alpine |
| Model | TMI-M990 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7874 MB |
