Alpine SWD-2000 handleiding
Handleiding
Je bekijkt pagina 5 van 55
SPECIFICATIONS
INPUT IMPEDANCE……………………..…………………………….
18k Ω (Line Input)
36k Ω (Speaker Input)
MAX POWER OUTPUT……………………………………………….
350W
CROSSOVER…………………………………………………………..
50~200Hz
DC 14.4V (Operational
between: 11~16V)
OPERATIONAL VOLTAGE……………………..…………………….
350mm x 300mm x 198mmDIMENSIONS……...……………………..…………………………….
Negative EarthEARTH TYPE……………………..………………...………………….
96dB/10W.mSENSITVITY………….…………………..…………………………….
8.5kgWEIGHT……...……………………..…………………………………..
PACKING LIST
PRODUCT NAME
PRODUCT NAME
QTYQTY
3-Pin connector 1
Power lead extension cable (5.5M) 1
Remote turn on extension cable (5.5M)
1
Scotch lock connector
4
Speaker to RCA connector (1M) 2
Mounting brackets
4
Self tapping screw
8
Machine screw 4
INTRODUCTION
• Please ensure that there is sufficient length of the various cables for your desired
subwoofer location.
• Certain products are incompatible with this subwoofer. Please read the instructions of
the product that will be used with the SWD-2000, alongside this manual during
installation.
1. INSTALLATION
1
Park the car at a safe place, on a level surface. Apply the handbrake and remove the key.
Work out where to install the subwoofer, and check that there is sufficient cable length.
2
Carry out the Installation.
WARNING - DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling
holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes,
fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.
EN
5
Bekijk gratis de handleiding van Alpine SWD-2000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alpine |
| Model | SWD-2000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9942 MB |
