Alpine PXE-X120-10DP handleiding
Handleiding
Je bekijkt pagina 9 van 64
Connections and Functions
1 Pre-Out Jacks
One group of RCA audio signal output, which can
be connected to an external power amplifier.
2 RCA Audio Input Jacks
1 group of RCA audio signal input, which can be
connected to the RCA audio signal
output of a car audio player.
3 High Level Input Connector
Connect to the high-level output of the car audio
player.
4 Ambient Light Interface
For future use.
5 Coaxial/ Optical Input Jack
Connect the car audio coaxial/ optical cable,
switch the audio source of the device to the digi-
tal signal input, and play the digital signal.
6 External Bluetooth Connector
Choose high-definition Bluetooth as the
input signal. After the connection is successful,
the Bluetooth is always on. Bluetooth connection
is also required to use the mobile tuning app.
7 Wired Controller Connector
Connect to external controller RUX-C810.
8 USB 2.0 Interface
A computer can be connected here via a USB
cable for more precise tuning and other settings.
9 Protection Indicator
Will be lit in case the protection mode is active.
0 Power Indicator
Lights up when power is on.
! Input Select Switch
When the switch is set to “ACC”, ACC starts the de-
vice; when it is set to “HOST”, the device is started
by the high level input signal H1-/H1+.
@ Fuse Socket
Insert two 30A fuses.
# Power Supply Terminal
Connect to the corresponding terminals of the car
battery.
$ Speaker Output Terminals
Connect speakers to the speaker output termi-
nals.
EN
9-EN
Bekijk gratis de handleiding van Alpine PXE-X120-10DP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alpine |
| Model | PXE-X120-10DP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5160 MB |
