Alpine PSS-TSLA-21Y handleiding
Handleiding
Je bekijkt pagina 2 van 14
Tesla Model Y
PSS-TSLA 20240320v3
2/14
Tesla Model 3/Y Power UP & Down Procedure
WARNING: Before beginning install on your tesla follow the below procedure.
1) Turn o the Screen in Settings Following Step (A,B,C)
A) Enter the Controls Menu in bottom Left Corner
B) Tap Safety & Security Menu on the Left-Hand Menu
C) Press the Power OFF Button, and Conrm OFF
2) Access the Frunk and disconnect the low voltage battery cable. Release Tab and Pull Up.
(To access the battery use 10mm socket to remove the Cowl, Tub & Cabin Filter Housing)
3) Remove the Rear Bench Seat Cushion
4) Un-Plug the the high voltage contactor under the Rear Seat
Battery State should be near 100% charged.
ALL WINDOWS ROLLED DOWN
Frunk & Trunk is OPEN
Rear Seat is Down (Model Y Only)
Tesla Model 3/Y Power Down Procedure
IMPORTANT: Re-install ALL Factory Plugs To Their Original Location, FAILURE TO DO SO
CAN CREATE COMPUTER FAULTS.
Bekijk gratis de handleiding van Alpine PSS-TSLA-21Y, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alpine |
| Model | PSS-TSLA-21Y |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14930 MB |
