Alpine PSS-TSLA-213 handleiding
Handleiding
Je bekijkt pagina 2 van 12
Tesla Model 3 & Y
PSS-TSLA 20240220v2
2/12
Tesla Model 3/Y Power UP & Down Procedure
WARNING: Before beginning install on your tesla follow the below procedure.
1) Turn o the Screen in Settings Following Step (A,B,C)
A) Enter the Controls Menu in bottom Left Corner
B) Tap Safety & Security Menu on the Left-Hand Menu
C) Press the Power OFF Button, and Conrm OFF
2) Access the Frunk and disconnect the low voltage battery (-) Cable.
3) Remove the Rear Bench Seat Cushion by unlatching 2 lock mechanisms at
the bottom edge of the seat.
4) Un-Plug the the high voltage contactor under the Rear Seat
Battery State should be near 100% charged.
ALL WINDOWS ROLLED DOWN
Frunk & Trunk is OPEN
1) Under the Rear Bench Seat cushion plug- in and latch the high voltage
battery contactor pictured above.
2) Access the Frunk and re-connect the low voltage battery (-) Cable.
3) Power up the vehicle pressing the brake pedal.
Tesla Model 3/Y Power Down Procedure
Tesla Model 3/Y Power Up Procedure
IMPORTANT: Re-install ALL Factory Plugs To Their Original Location, FAILURE TO DO SO
CAN CREATE COMPUTER FAULTS.
Bekijk gratis de handleiding van Alpine PSS-TSLA-213, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alpine |
| Model | PSS-TSLA-213 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10261 MB |
