Alpine KCE-350BT handleiding

13 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 6 van 13
5-EN
ALPINE KCE-300BT 68-08564Z70-A (EN)
Registering the Bluetooth Device
(AV Head Unit only)
The Bluetooth device is used when a connectable Bluetooth
compatible device is searched and connected from an AV
head unit, or a new Bluetooth compatible device is registered.
Setting item: DEVICE SEARCH
1
When DEVICE SEARCH is selected,
SEARCHING... is displayed, and searching
starts.
2
Touch [:] of a device name to be connected
from the DEVICE SEARCH list.
3
If the adapter is successfully connected to a
Bluetooth compatible device, a paired device
name and a registered number (No. 1 to 4 or
guest mode) are displayed, and then the unit
returns to normal mode.
If a mobile phone is registered for the first time:
Input a passcode when the numeric keypad screen is
displayed.
A passcode input on a AV Head Unit is maximum 4-digit. If
a passcode on the Bluetooth compatible device exceeds 4
digits, reset the passcode and make this setting again.
Setting the Bluetooth Device (AV Head Unit only)
To set the KCE-350BT as the BLUETOOTH ADAPTER
1
Press the SETUP Button to and select
SYSTEM SETUP.
Controlling from a CD Head Unit / Digital Media
Receiver:
1 Turn the Rotary encoder or the Center jog dial to select
the Bluetooth compatible device to be deleted.
2 Press ENT. (Depending on the connected units, this
operation may not be necessary.)
To set the [*] button as the phone key
1
Press the SETUP Button and select SYSTEM
SETUP.
Scroll down the OPTION KEY and select TEL.
2
Scroll down to the BLUETOOTH IN and select
ADAPTER.
2
Setting the Search Mode
not from a Bluetooth compatible device. Normally set this to
ON.
Setting item: VISIBLE MODE
ON:
Bluetooth compatible device.
OFF:
Bluetooth compatible device.
(passcode) input operation, refer to the mobile phones
Owners Manual.
Setting the Received Calls automatically
When a call is received, you can set whether to receive it
automatically or not.
Setting item: AUTO ANSWER
ON: When a call is received, it will be taken
automatically.
OFF: When a call is received, it will not be received
automatically. If a message is displayed and
[YES] is touched when a call is received, you
can receive the call. (When a CD Head Unit /
Digital Media receiver is connected, press
PHONE to receive a call.)
Even if this setting is set to ON/OFF, the received call
setting on the mobile phone takes priority.
You can set whether the KCE-350BT can be recognized or
input passkey (passcode). For a mobile phones passkey
Enable recognition of the KCE-350BT from the
Depending on the mobile phone, you may be necessary to
Disable recognition of the KCE-350BT from the
Deleting a Bluetooth Device from the list
You can delete the history of a previously connected
Bluetooth compatible device.
Setting item: CLEAR DEVICE
1
Touch [:] of the Bluetooth compatible device
you want to delete from the CLEAR DEVICE
list.
A message is displayed.
2
Touch [YES] if you want to delete.
Touching [NO] will cancel the setting.
Object Push Profile (OPP) Contact/Phonebook
Transfer
To PUSH your Contacts to the KCE-350BT using the OPP
1
Enter the Contacts Menu on your phone.
2
Select the Contact that you wish to transfer
to the KCE-350BT.
For further instructions on how to PUSH contacts via
Bluetooth, please reference your phones Owners Manual.
3
Select the PUSH VIA BLUETOOTH (or similar)
command on your phone.

Bekijk gratis de handleiding van Alpine KCE-350BT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAlpine
ModelKCE-350BT
CategorieNiet gecategoriseerd
TaalNederlands
Grootte1921 MB

Caratteristiche Prodotto

Kleur van het productZwart
ConnectiviteitstechnologieDraadloos
Mac-compatibiliteitNee
CompatibiliteitIVA-W505, IVA-W205, IVA-D105, IVA-D106, iDA-X100/M, iDA-X200, iDA-X300, iDA-X001, CDA-9887, CDA-9886/M, CDA-9885, CDA-9884, CDA-9883, CDE-9874