Alpine IVA-D105R handleiding
Handleiding
Je bekijkt pagina 21 van 79
20-EN
01GB05IVA105R.fm
ALPINE IVA-D105R 68-08564Z60-B (EN)
1
Press SOURCE/ .
The SOURCE selection screen is displayed.
2
Touch [DVD].
The display shows the DVD player mode screen.
Insert a disc with the label side facing up. The unit starts to
play the disc.
When an optional Alpine DVD player is connected:
Insert a disc into the DVD/Video CD/CD player, the player
starts playing.
• The operation screen changes to the visual screen in the DVD or
Video CD mode for 5 seconds after an operation has been performed.
Touch the display panel to display the operation screen again.
• The display mode can be changed by touching [WIDE].
For operation, see “Switching Display Modes” on page 28.
To eject the disc
Press .
• The reverse side of a double-sided DVD will not be played
automatically.
Remove the disc, turn it over, and reinsert it.
• If the disc does not eject, press and hold for at least 3 seconds.
• Do not insert discs containing maps for the navigation system. Doing
so could result in damage.
• Refer also to “DVD Setup” (pages 30 to 34).
• Be sure the remote input lead is connected to the remote output lead
of this unit when a DVD changer or DVD player is connected. If not
correctly connected, touch operation cannot be performed.
• To return to the previous screen during Video CD playback, touch
[RTN] after touching [PAGE1/2] of the function guide. However, the
function may vary depending on the disc.
• If the disc is left in the unit after pressing , the disc is
automatically pulled back into the unit and stopped. In this case,
start playback by touching [/] or eject again and remove the
disc within 15 seconds.
• While “INDEX READING” is displayed by DivX
®
, the fast-
forwarding/fast-reversing and repeat functions, etc. cannot be used.
On DVDs and Video CDs with playback control (PBC), menu screens
may appear automatically. If this happens, perform the operation
described below to start playback.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVD-
Audio Playback Mode” (page 33).
Direct Menu Operations
1 Touch the DVD menu directly.
Menu Operations
1 Touch [KEY].
The menu operation mode will be displayed.
2 Select a desired menu item by touching [], [], [] or
[].
3 Touch [ENTER] to confirm the selected item.
Numeric Keypad Input Operations
1 Touch [KEY].
The menu operation mode appears.
2 Touch [KEY] again.
The numeric keypad input mode screen appears.
3 Touch a desired number.
4 Touch [ENT] on the numeric keypad mode screen to
confirm your selection.
If a menu screen appears
• Some operations cannot be performed depending on the disc.
Touch [RETURN] to return to
the previous display.
(Operation may not be
possible, depending on the
disc.)
Touch [RETURN] to close the
numeric keypad input screen.
The numeric
keypad input
screen closes
when the area
is touched
while
displayed.
01GB00IVAD105R.book Page 20 Tuesday, February 13, 2007 1:58 PM
Bekijk gratis de handleiding van Alpine IVA-D105R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alpine |
| Model | IVA-D105R |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12991 MB |
