Alpine DVA-5205P handleiding
Handleiding
Je bekijkt pagina 37 van 72
37
SET UP
SET UP
DVD
CD
Set to “DVD” when connected to the CVA-
1005R/IVA-M700R/IVA-C800R.
Operations can be performed using the CVA-
1005R/IVA-M700R/IVA-C800R’s main menu
screen.
For details, refer to the operating instructions of
the CVA-1005R/IVA-M700R/IVA-C800R.
“DVD” is selected upon shipment from the
factory.
Set to “CD” when connected to an Ai-NET
product (head unit) other than the CVA-1005R/
IVA-M700R/IVA-C800R (for ex.: CVA-1000R).
Operations can be performed from the head
unit.
For details, refer to “Operating from the head
unit” (page 56).
Notes:
• Press “RTN” to return to the previous screen.
• If the Ai-NET setting is “CD” when used with the
CVA-1005R/IVA-M700R/IVA-C800R, operation
from the main menu screen is not possible.
• If the Ai-NET setting is “DVD” when used with any
Ai-NET compatible head unit other than the CVA-
1005R/IVA-M700R/IVA-C800R, volume is the
only operation possible
from the head unit.
• To call the DVD video by using the CVA-1000R,
switch the mode to “AUX” with the V. SEL button
on the CVA-1000R.
• When the Ai-NET setting is “CD”, the operable
functions and displays may differ depending on
the Ai-NET compatible head unit connected.
Press “SET” for at least
2 seconds.
The settings are stored
and the set up mode is
canceled.
Turn off the vehicle’s ignition, then turn
it on again.
Notes:
Cases in which DVDs cannot be played on the
CVA-1005R/IVA-M700R/IVA-C800R side
– When “DVD” is not displayed on the CVA-1005R/
IVA-M700R/IVA-C800R side menu screen
– When DVDs cannot be played even when AUX1
is selected
This is because the DVA-5205P’s Ai-NET setting is
set to “CD”.
Use the procedure described below to change the
setting.
1. Remove the disc from the DVA-5205P.
2. Turn on the power of the DVA-5205P and CVA-
1005R/IVA-M700R/IVA-C800R.
Also start up the CVA-1005R/IVA-M700R/IVA-
C800R monitor.
3. Press the CVA-1005R/IVA-M700R/IVA-C800R
SOURCE switch and select “CD” from the menu.
4. Press the SOURCE switch, then select “V.SEL”
from the menu.
5. In the V.SEL mode, select “AUX1”. This displays
the DVA-5205P screen.
6. On the DVA-5205P, set the Ai-NET setting to
“DVD”. Refer to “Changing the Ai-NET settings”
(pages 36 and 37).
7. Turn the car’s ignition switch off, then turn it back
on.
Custom setting – Changing the Ai-NET settings
DISP
MENU
SET
Displays the setting contents.
Bekijk gratis de handleiding van Alpine DVA-5205P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alpine |
| Model | DVA-5205P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7585 MB |
