Alphatronics Clear Sound 400 handleiding
Handleiding
Je bekijkt pagina 22 van 60
22
Connecting with a TV
Setting “PCM” on your TV
When all cables are connected properly, and LED indicator
lights properly, if there is no sound from tv or Sound Bar, please
setting your tv as below:
C
Method 2. Connecting using an Optical/Coaxial cable. Select
Optical/Coaxial mode and set the TV’s audio output to “PCM”.
(More information on PCM page)
D
Method 3. Connecting using an High speed ARC cable. Select
ARC mode and set the TV’s audio output to “PCM”.
(More information on PCM page)
B
Select AUX mode.
TV
HD-ARC COAXIAL OPTICAL AUX USB DC
6. COMMISSIONING
6.1 Connecting the soundbar to the vehicle electrical system
The soundbar is designed for direct connection to a 12V power supply in the vehicle. Use the enclosed 12V power
cable or a suitable alternative cable. If alternative connection cables are used, please ensure that the connector plug
for the soundbar has the correct dimensions.
As the soundbar is a playback device with loudspeakers, we strongly recommend connecting the soundbar to the
same circuit as your TV set. This ensures that no unwanted interference impulses impair the sound quality.
Important note!
Never use the vehicle lighting or refrigerator circuit, as experience has shown that this can lead to faults such as
humming. If such problems occur, check the power supply and move the connections to a separate, stable circuit
if necessary.
This precautionary measure will ensure interference-free sound quality and optimum functioning of your soundbar.
6.2 Mounting the soundbar
The soundbar oers exible set-up options that can be customised to your individual requirements:
Installation on a sideboard / cabinet: Place the soundbar securely on a at and stable surface, for example on a
sideboard. Make sure that the soundbar does not wobble and has sucient space for unhindered sound distribution.
Wall mounting: Thanks to the integrated brackets at the rear, the soundbar can be securely attached to the wall. The
hole spacing between the mounting brackets is 320 mm, which allows for stable and easy installation.
Important notes on wall mounting!
• Use screws and wall plugs that are suitable for the nature of your wall.
• Before installation, check that the wall has sucient load-bearing capacity to prevent slipping or damage.
Recommendation for positioning: We recommend placing the soundbar in the centre below your TV set, at a dis-
tance of about 10 cm from the bottom edge of the set. This position ensures optimum sound transmission, as the
sound is emitted into the room unhindered. It also allows the connection cables to be laid inconspicuously, which
contributes to a tidy and harmonious appearance.
Bekijk gratis de handleiding van Alphatronics Clear Sound 400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alphatronics |
| Model | Clear Sound 400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3986 MB |