Allen-Heath Xone:43C handleiding
Handleiding
Je bekijkt pagina 21 van 33
Allen & Heath 21 XONE:43C User Guide
MIDI
MIDI stands for Musical Instrument Digital Interface, and is an interface protocol from the
nineteen eighties to enable different keyboards, sequencers, drum machines, etc. to communicate
with each other.
MIDI is still a common interface used by most DAW software to allow remote control of various
functions within the program.
The Xone:43C has the ability to send and receive MIDI. Including 18 MIDI enabled controls, 14
Buttons and 4 Faders that can be assigned to enable control of various parameters in a DAW such
as Ableton Live or Traktor:
The Default MIDI Channel is 16 (Hex = 0F)
You can change MIDI channel by holding down the Mic/Aux channel CUE button when powering
on the mixer. The CUE button will then flash to show you are in MIDI setup mode.
Channel 1-4 CUE buttons will display the current MIDI channel number in Binary.
Use the HPF & LPF buttons to cycle through MIDI channels.
Once you have selected the MIDI channel to use, press the flashing Mic/Aux channel CUE button
to exit the MIDI setup mode.
The MIDI channel is saved in memory and will be remembered when you power off the mixer.
See the next page for a table on converting binary to decimal.
Bekijk gratis de handleiding van Allen-Heath Xone:43C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Allen-Heath |
| Model | Xone:43C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8415 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 5200 g |
| Breedte | 320 mm |
| Diepte | 370 mm |
| Hoogte | 110 mm |
