Handleiding
Je bekijkt pagina 48 van 77
Steps
1. Remove the two screws (M2x1.9) that secure the keyboard-controller board bracket to the palm-rest and keyboard assembly.
2. Peel the tape that secures the keyboard-controller board bracket to the palm-rest and keyboard assembly.
3. Lift the keyboard-controller board bracket off the keyboard-controller board.
4. Open the latch and disconnect the keyboard-backlight cable from the keyboard-controller board.
5. Open the latch and disconnect the touchpad-light cable from the keyboard-controller board.
NOTE: Your computer may be shipped with an touchpad-light cable depending on the configuration you have ordered.
6. Open the latch and disconnect the keyboard-controller board cable from the keyboard-controller board.
7. Open the latch and disconnect the touchpad cable from the keyboard-controller board.
8. Open the latch and disconnect the keyboard cable from the keyboard-controller board.
9. Remove the two screws (M1.6x1.6) that secure the keyboard-controller board to the palm-rest and keyboard assembly.
10.Lift the keyboard-controller board off the palm-rest and keyboard assembly.
Installing the keyboard-controller board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the keyboard-controller board and provides a visual representation of the installation
procedure.
48
Bekijk gratis de handleiding van Alienware x15 R1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alienware |
| Model | x15 R1 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 34830 MB |
Caratteristiche Prodotto
| Kleur van het product | Silver, White |
| Gewicht | 2360 g |
| Breedte | 359.7 mm |
| Diepte | 277.33 mm |
| Gewicht verpakking | 5180 g |
