Handleiding
Je bekijkt pagina 43 van 77
Next steps
1. Install the rear I/O-cover.
2. Install the base cover.
3. Follow the procedure in After working inside your computer.
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the
battery.
About this task
The following image(s) indicate the location of the speakers and provides a visual representation of the removal procedure.
Steps
1. Disconnect the speaker cable from the system board.
2. Open the latch and disconnect the keyboard-controller board cable from the system board.
3. Peel the tape that secures the speaker cable to the palm-rest and keyboard assembly.
4. Remove the speaker cables from the routing guides on the palm-rest and keyboard assembly.
5. Lift the right and left speaker, along with its cable, off the palm-rest and keyboard assembly.
Installing the speakers
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
43
Bekijk gratis de handleiding van Alienware x15 R1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alienware |
| Model | x15 R1 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 34830 MB |
Caratteristiche Prodotto
| Kleur van het product | Silver, White |
| Gewicht | 2360 g |
| Breedte | 359.7 mm |
| Diepte | 277.33 mm |
| Gewicht verpakking | 5180 g |
