Handleiding
Je bekijkt pagina 34 van 77
NOTE: To avoid damaging your computer, ensure that the Tron-light cable is not pinched when sliding the rear I/O-cover into
palm-rest and keyboard assembly.
Steps
1. With the correct orientation, slide the rear I/O-cover into the palm-rest and keyboard assembly, and snap it into place.
2. Slide the left and right Tron-light cables into their respective connectors on the system board and close the latches to secure the
cables.
CAUTION: Do not pull at the bend points of the Tron-light cables and check for damage while removing and installing.
3. Replace the two screws (M2.5x9) that secure the rear I/O-cover to the palm-rest and keyboard assembly.
Next steps
1. Install the base cover.
2. Follow the procedure in After working inside your computer.
Power-adapter port
Removing the power-adapter port
Prerequisites
1. Follow the procedure in
Before working inside your computer.
2. Remove the base cover.
34
Bekijk gratis de handleiding van Alienware x15 R1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alienware |
| Model | x15 R1 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 34830 MB |
Caratteristiche Prodotto
| Kleur van het product | Silver, White |
| Gewicht | 2360 g |
| Breedte | 359.7 mm |
| Diepte | 277.33 mm |
| Gewicht verpakking | 5180 g |
