Handleiding
Je bekijkt pagina 74 van 98
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the memory module.
4. Remove the M.2 2230 solid-state drive in slot three and four.
5. Remove the M.2 2280 solid state drive or M.2 2230 solid-state drive in slot one and two, whichever applicable.
6. Remove the small fan.
7. Remove the top heat-sink.
8. Remove the wireless card.
9. Remove the rear-I/O cover.
10.Remove the battery.
11. Remove the speakers.
12. Remove the power-adapter port.
13. Remove the touchpad.
14. Remove the antennas
15.Remove the display assembly.
16.Remove the keyboard-controller board.
17. Follow the procedure from step 1 to step 16 in Removing the system board.
NOTE: The system board can be removed and installed along with the audio board, USB Type-C board, and heat sink-
assembly. This simplifies the removal and installation procedure and avoids breaking the thermal bond between the system
board and heat sink.
18.Remove the power button.
About this task
The following image(s) indicate the location of the palm-rest and keyboard assembly and provides a visual representation of the
removal procedure.
74
Bekijk gratis de handleiding van Alienware m18 R1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alienware |
| Model | m18 R1 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 41444 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 4230 g |
| Breedte | 410.3 mm |
| Diepte | 319.9 mm |
| AC-adapterfrequentie | 50 - 60 Hz |
