Handleiding
Je bekijkt pagina 32 van 98
5. Lift the I/O board off the palm-rest and keyboard assembly.
Installing the I/O board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the I/O board and provides a visual representation of the installation procedure.
Steps
1. Align the screw holes on the I/O board with the screw holes on the palm-rest and keyboard assembly.
2. Replace the four screws (M2x3) that secure the I/O board to the palm-rest and keyboard assembly.
3. Connect the I/O board cable to the palm-rest and keyboard assembly and adhere the tape to secure the I/O board cable.
4. Connect the power-button cable and close the latch to secure the cable.
Next steps
1. Follow the procedure from step 5 to step 10 in Installing the system board.
32
Bekijk gratis de handleiding van Alienware m18 R1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alienware |
| Model | m18 R1 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 41444 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 4230 g |
| Breedte | 410.3 mm |
| Diepte | 319.9 mm |
| AC-adapterfrequentie | 50 - 60 Hz |
