Handleiding
Je bekijkt pagina 60 van 87
About this task
The following image(s) indicate the location of the ethernet and audio board and provides a visual representation of the installation
procedure.
Steps
1. Connect the ethernet and audio board to the system board.
2. Align the screw holes on the ethernet and audio board to the screw holes on the system-board assembly.
3. Replace the two screws (M2x4) that secure the ethernet and audio board to the system-board assembly.
4. Turn the system-board assembly over.
Next steps
1. Follow the procedure from step 6 to step 25 in
Installing the system board.
2. Install the battery.
3. Install the rear-I/O cover.
4. Install the
wireless card.
5. Install the 2230 solid-state drive or 2280 solid-state drive in slot one, whichever applicable.
6. Install the 2230 solid-state drive or 2280 solid-state drive in slot two, whichever applicable.
7. Install the base cover.
8. Follow the procedure in After working inside your computer.
USB board
Removing the USB board
Prerequisites
1. Follow the procedure in
Before working inside your computer.
2. Remove the
base cover.
3. Remove the 2230 solid-state drive or 2280 solid-state drive in slot one, whichever applicable.
4. Remove the 2230 solid state drive or 2280 solid-state drive in slot two, whichever applicable.
5. Remove the wireless card.
6. Remove the rear-I/O cover.
60
Bekijk gratis de handleiding van Alienware m15 R7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alienware |
| Model | m15 R7 |
| Categorie | Laptop |
| Taal | Nederlands |
| Grootte | 35462 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Gewicht | 2690 g |
| Breedte | 356.2 mm |
| Diepte | 272.5 mm |
| Gewicht verpakking | 5000 g |
