Handleiding
Je bekijkt pagina 52 van 69
52
Operating the monitor
OSD warning message
You will see the following message when the monitor does not support a particular resolution mode:
Figure 39. Warning message if a particular resolution mode is not supported
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor specifications for the
horizontal and vertical frequency ranges supported by this monitor. The recommended resolution is 2560 x 1440.
NOTE: The message may vary slightly depending on the connected input signal.
You will see the following message before the DDC/CI feature is disabled:
Figure 40. Warning message of the DDC/CI
You will see the following message when you increase the BRIGHTNESS level above the factory default setting for the first time:
Figure 41. Warning message of increasing the Brightness level
NOTE: If you select Yes, the message will not appear the next time you change the BRIGHTNESS setting.
You will see the following message when you set PRESET MODES to FPS, MOBA/RTS, or SPORTS for the first time:
Figure 42. Warning message of setting Preset Modes
NOTE: If you select No, the BRIGHTNESS level will change to 75% for these PRESET MODES.
You will see the following message when you change the default setting of power saving features to SMART HDR or USB CHARGING
for the first time after factory reset:
Bekijk gratis de handleiding van Alienware AW2725DM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alienware |
| Model | AW2725DM |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 6932 MB |
