Alfatron ALF-VM52 handleiding
Handleiding
Je bekijkt pagina 24 van 51
24
ALF-VM52
7.4.3
Streaming
Go to ‘Media’ Settings. Here you can have two ingest URLs (Push Streams) to send the
stream to online streaming services. You can also have up to 6 RTSP streams (Pull
Streams) to receive streams from the local network.
Click the [STREAM] button to start streaming. If the ingest URL address is available, the
[STREAM] button will light up green and start ingesting.
7.4.3.1
Bitrate
You can modify the bitrate of ingest streams. Go to the media settings, select Push
Stream, and click
Bitrate, which ranges from 1 to 20. The default bitrate is 10.
7.4.3.2
Frame Rate
You can modify the frame rate of the ingest streams. Go to the ‘Media’ settings, select
‘Push Stream’, click ‘Frame Rate’, and the frame rate range is 24, 25, 30, 50, and 60.
The default frame rate is 60.
7.4.3.3
Streaming Switch Control
You can Turn On/Off control the two ingest streams individually. Go to ‘Media’ settings,
select ‘Push Stream’, Select and click ‘Stream 1’ or ‘Stream 2’ to turn on/off each stream
individually.
Note: Streaming is activated/ deactivate (‘Go Live’) by pressing the [Stream] button on
the front panel of the ALF-VM52.
7.4.4
Pull Streaming
Fill in the local streaming address (up to 6 addresses) through a host computer by
accessing the GUI interface, click Save. In the ‘Media’ menu select ‘Pull Stream’, then select
the corresponding address in the menu, and click the Rotary Menu knob to activate the
selected pull stream.
Bekijk gratis de handleiding van Alfatron ALF-VM52, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alfatron |
| Model | ALF-VM52 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18830 MB |