Alfatron ALF-30X-SDIW handleiding
Handleiding
Je bekijkt pagina 27 van 41
Alfatron ALF-XXX-SDIW
24
Exposure Mode: Set the exposure mode (the default automatic, manual, shutter priority, aperture priority, brightness priority
optional)
Exposure compensation: Exposure compensation setting is active when it is in auto status (default is off).
Exposure compensation value: Set the exposure compensation value, valid when it is set for auto (default 0-7 to 7 optional).
BLC: Set back light compensation, valid when it is in auto status (default is off).
Anti-flicker: Set up anti-flicker mode, valid when status of automatic, aperture or brightness priority (default 50Hz, closed,60Hz
optional).
Gain limit: set the gain limits, auto, active when it is status of aperture or brightness priority (default 3, 0-15 optional).
Dynamic range: set the dynamic range (default 5, 0-8 optional).
Shutter speed: active when it is status of manual or shutter-priority (default 1/100，1/25、1/30、1/50、1/60、1/90、1/100、
1/120、1/180、1/250、1/350、1/500、1/1000、1/2000、1/3000、1/4000、1/6000、1/10000 optional).
Aperture value: Set the aperture value, active when it is status of manual or aperture-priority (default F1.8, closed, F11, F9.6,
F8.0, F6.8, F5.6, F4.8, F4.0, F3.4, F2 .8, F2.4, F2.0, F1.8 optional).
Brightness: Set the brightness value, active when it is in a state of brightness priority (default 7,0-23 optional).
c. Color: White balance, saturation, color, white balance, sensitivity, color temperature, gain red and blue gain can be set.
White balance modes: Set the white balance mode (the default automatic, 3000K, 4000K, 5000K, 6500K, manual, One-push
optional). Note: Click the “Correction” button when selected the One-push white balance mode.
Saturation: Set the saturation (default 80%,60%,70%,80%,90%,100%,110%,120%,130%, optional).
Auto white balance Sensitivity: Sensitivity Auto white balance settings (default is low, high, medium optional).
Chroma: Set the chrome (default 7,0-14 optional).
Color Temperature: set color temperature (Default setting: High, with low, middle for options)
Red Gain: Set the red gain, effective when it is manual (default 255,0-255 optional).
Blue Gain: Sets the Blue gain, effective when it is manual (default 199,0-255 optional).
d. Image: Brightness, contrast, sharpness, black and white mode, the gamma curve, Horizontal Flip and Vertical Flip can be set.
Brightness: Set the brightness (default 6,0-14 optional).
Contrast: set the contrast (default 8,0-14 optional).
Sharpness: Set the sharpness value (default 7, 0-15 optional).
Black and white mode: Set black and white mode (default color, black/white optional).
Gamma: Gamma value setting (default, 0.45, 0.50, 0.52, 0.55 optional).
Flip Horizontal: Set Flip Horizontal (default Off, On optional).
Flip Vertical: Set vertical flip (default Off, On optional).
e. Noise Reduction: 2D noise reduction,3D noise reduction and dynamic dead pixel correction available.
2D Noise Reduction: Set 2D noise reduction level (default Auto,1-7 and Off optional).
3D Noise Reduction: Set 3D noise reduction level (default 5,1-8 and Off optional).
Dynamic dead pixel correction: Set Dynamic dead pixel correction (default Off,1-8 optional).
Note: Click “Refresh” to make revision of any video parameters of a, b, c, d, and e effective.
4) Character-Overlapping
Display date and time: Set whether to display the time and date (default display).
Display Title: Set whether to display the title (default display).
Font Color of Time: Set font color of time and date (default white, black, yellow, red, blue optional).
Font Color of Title: Set font color of title (default white, black, yellow, red, blue optional).
Moving characters: Set the display position of moving date, time, and title, click on the "up, down, left, right" buttons to
move the corresponding character position.
Title Content: Set title content (default CAMERA1).
Time Content: Set time content (default 1970/01/10 05:36:00)
Click on the "Save" button and display the "Save successful" message, then valid
5)Character Size
Mainstream character size: Set the character size of the display, the device will restart automatically after changes are saved (default
24,24,16 optional)
Secondary stream character size: Set the character size of the display, the device will restart automatically after changes are saved
(default 16,24,16 optional)
Click on the "Save" button to display "Parameter saved successfully" message, set to take effect.
6)Video output
Output Format: Set the video output format (default 1080P60, 1080P50, 1080P30, 1080P25, 1080I60, 1080I50, 720P60, 720P50,
720P30, 720P25, 1080P59.94, 1080I59.94, 1080P29.97, 720P59.94, 720P29.97 optional).
Bekijk gratis de handleiding van Alfatron ALF-30X-SDIW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alfatron |
| Model | ALF-30X-SDIW |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 8754 MB |
