Alfatron ALF-20X-CAM handleiding
Handleiding
Je bekijkt pagina 23 van 39
ALFATRON ALF-5/10/12/20X/30X-CAM
23
Restore default: options: yes/no; after restoring default, the video format won’t be restored.
Note: If the address of former remoter is not 1 but another one from 2,3,4, the corresponding camera address will restore to 1
when all parameters or system parameters are restored. User should change the remoter address to be 1 (press No.1 according to
the camera so to get normal operation )
4.
Network Connection
4.1
Connecting Mode
Direct connection: Connect the camera and computer by network connecting cable.
Internet connection mode: Connect the camera to the Internet by Router or Switch and the user can log in to the device by the
browser.
Note: Please do not put the power and network cable in places where can be easily touched to prevent video quality lowered
by unstable signal transmission due to poor contact of cables.
The computer must have the network segment where the camera IP address belongs to. The device will not be
accessible if without the segment. I.E. The camera default IP address is 192.168.5.163, then segment 5 must be added to the
computer. Visca Port: Set Visca port, the device will restart automatically after change (default 1259; 0-65535 optional).
Specific steps are as below:
Firstly open the window of Local Area Connection Properties on the computer, select the “Internet Protocol version 4(TCP/
IPv4)” as shown by the picture on the left. Double click or click the property “Internet” protocol version 4 (TCP/IPv4)to enter
into the Internet Protocol Version 4(TCP/IPv4) Properties window, select “Advanced” to enter into the Advanced TCP/IP Setting
and add IP and subnet mask in the IP browser as the picture is shown below. Click the “Confirm” to finish the adding of the IP
segment. Users can add the corresponding network segment according to the revised IP address of the camera.
RESTORE DEFAULT
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
Restore Default? NO
[↑↓]Select [← →]Change Value
[Menu]Back [Home]OK
Bekijk gratis de handleiding van Alfatron ALF-20X-CAM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Alfatron |
| Model | ALF-20X-CAM |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 9506 MB |
