Albrecht Multicom 2 handleiding
Handleiding
Je bekijkt pagina 13 van 40
13
English
1. Scope of delivery
1. Multicom 2 radios
2. Headsets / earphones
3. Power supply unit incl. 4-way charging cable
4. Softshell bag
5. Manual
2. Overview and getting started
The Multicom 2 system enables simultaneous two-way
communication (full-duplex) between up to 5 participants and 94
other listeners. There are three different device types:
1. Main device (Main): The central coordinator for communication.
One main device is always required for each group.
2. Transmitting devices (Vice): Enable sending and receiving of
audio. Up to 4 devices per group possible.
3. Receiver: Reception and playback of audio, but no talkback
possible.
Fully charge all devices with the supplied charger before using
them.
Connect the supplied headsets (earphones for receiver) with the
socket on the top of the devices.
Switch on the devices to start communication. All devices in a group
must be set to the same channel (see chapter 4.5 „Central channel
synchronization“ auf Seite 16). Make sure that all devices are
within range of the main device. The range is approximately 200 m
and can be restricted by obstacles between the devices.
Bekijk gratis de handleiding van Albrecht Multicom 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Albrecht |
| Model | Multicom 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3331 MB |