Al-ko PS 1815 handleiding
Handleiding
Je bekijkt pagina 25 van 252
443170_a 25
Working techniques (06, 07)
7 WORKING TECHNIQUES (06, 07)
WARNING! Hazards from loose material!
Sawing of material that is not clamped can lead
to serious injuries.
■
Saw material only when it is securely
clamped.
■
Contact the material with the saw blade of
the handsaw only when the handsaw has
reached its full speed.
■
Ensure that the material to be sawn is se-
curely clamped – any movement of the mate-
rial will influence the sawing result.
■
Start to cut only when the sabre saw has
reached its full speed.
■
Do not apply excessive force during sawing –
a uniform, gentle pressure offers the best re-
sults.
■
With thick workpieces: Place foot plate (06/1)
firmly onto workpiece (06/2) and move the
sabre saw slowly and uniformly around the
workpiece (06/a).
■
With thin workpieces: Fix workpiece (07/1)
between retaining bracket (07/2) and foot
plate (07/3). Then push the sabre saw slowly
and uniformly downwards (07/a).
■
Reduce the pressure shortly before the mate-
rial is sawn through completely.
■
Wait until the saw blade has come to a com-
plete standstill before removing it from the
workpiece.
■
The saw blade becomes very hot during op-
eration. Allow it to cool down before touching
it.
■
Saw dust can be toxic. Therefore ensure
good ventilation at the place of work and
wear a face mask.
■
Saw dust can ignite. Therefore dispose of
saw dust as quickly as possible.
8 MAINTENANCE AND CARE
WARNING! Danger of cuts and lacera-
tions. Danger of cuts and lacerations when
reaching into sharp-edged, moving appliance
parts and into cutting tools.
■
Before maintenance, care and cleaning work,
always switch off the appliance. Remove the
rechargeable battery.
■
Always wear protective gloves during mainte-
nance, care and cleaning work.
NOTE Repair work is only allowed to be car-
ried out by expert workshops or our service cen-
tres.
■
Do not expose the appliance to rain or mois-
ture.
■
After every use:
■
Remove the rechargeable battery and in-
spect the appliance for damage.
■
Pull out the saw blade, clean and spray
with corrosion protection oil.
■
Clean the housing using a brush or cloth.
Do not use water and/or aggressive
cleaning agents or solvents - risk of cor-
rosion and damage to the plastic parts.
■
Remove deposits of wood chips from
clamping ring (03/1) and saw blade hold-
er (03/4) using a brush or cloth. Then ap-
ply a few drops of corrosion protection oil
to the saw blade holder.
■
Inspect the saw blade at regular intervals.
Contact one of the manufacturer’s service
centres in the event of:
■
A defective saw blade
■
A blunt saw blade
■
Excessive wear
■
Inspect all bolts for tightness at regular inter-
vals.
■
Inspect the electrical contacts of the appli-
ance for corrosion, clean with a fine wire
brush if necessary and then spray with a con-
tact spray.
9 HELP IN CASE OF MALFUNCTION
CAUTION! Risk of injury. Sharp-edged
and moving appliance parts can lead to injury.
■
Always wear protective gloves during mainte-
nance, care and cleaning work.
■
Switch off the appliance and remove the re-
chargeable battery.
NOTE For malfunctions that are not listed in
this table or that you cannot resolve yourself,
please contact our customer service.
Bekijk gratis de handleiding van Al-ko PS 1815, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Al-ko |
| Model | PS 1815 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29667 MB |
Caratteristiche Prodotto
| Kleur van het product | Blauw |
| Gewicht | 1500 g |
| Stroombron | Batterij/Accu |
| Accu/Batterij voltage | 18 V |
| Maximale takdikte | 150 mm |
