Akai ATT-15SE handleiding
Handleiding
Je bekijkt pagina 9 van 135
7. To finish encoding, press the STOP or REC button. The display will show
“STOP” and return to PHONO mode.
NOTE: The recording speed is 1:1. Recording will take as long as playing the
record.
TRACK SEPARATION
1. You can divide the recording music from Phono to USB/SD track by trace
during encoding.
2. Every time when press the “TS”(track separation) button once during
encoding from Phono to USB/SD, the system will generate a new track and
continuous the recording. The text “TS“ at LCD display will flashing one
time, it means the unit is creating a new track successfully.
Replacing the Stylus
It is recommended that the stylus is replaced as soon as you notice a change in
the sound quality. Prolonged use of a worn-out stylus may damage the record.
Wear and tear on the stylus will be accelerated when playing 78 RPM records.
A: Removing the stylus from the cartridge
Place a screwdriver at the tip of the stylus heads and push downwards in the
direction shown in sketch “A”. Remove the stylus head shell by pulling it
forwards and pushing downwards.
B: Installing the new stylus
Hold the tip of the stylus head shell and insert it by pressing in the direction
illustrated by “B”. Push the stylus head shell upwards in the direction illustrated
by “C” until the stylus locks into the tip position.
Bekijk gratis de handleiding van Akai ATT-15SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Akai |
| Model | ATT-15SE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17984 MB |
