Akai ATT-15SE handleiding
Handleiding
Je bekijkt pagina 7 van 135
4. Press "REP/MEM/TS/CLK-ADJ" again to confirm.
5. Repeat steps 1 to 4 for more channels.
6. You can now call the saved stations with "FOLDER/ MEM.PRE".
NOTE: The device does not support Radio recording due to interference.
PLAYING VINYL RECORDS
IMPORTANT!
When using the turntable:
•
Make sure to remove the stylus protector, as illustrated above. (It should
easily slide off the stylus assembly.)
•
Make sure to unclip the tone arm lock before use and to secure it again
after use.
Playing a vinyl record
1. Power ON/OFF the system: Press the POWER button to turn the device on.
2. Use the function switch to select PHONO mode.
3. Set the speed selector to the appropriate position: 33, 45 or 78, according
to the vinyl record to be played.
4. Set the auto stop control to ON if you want the turntable to stop turning
when it has reached the end of the vinyl record. If the switch is set to OFF,
the turntable will continue turning at the end of the vinyl record.
5. Place the vinyl on the turntable (use the 45 rpm adaptor, if required).
6. Move the lift lever towards the back to raise the tone arm from the arm
park, then slowly move the arm to the record, as illustrated on the above,
The turntable will start rotating.
Bekijk gratis de handleiding van Akai ATT-15SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Akai |
| Model | ATT-15SE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17984 MB |
