Akai ATT-15SE handleiding
Handleiding
Je bekijkt pagina 5 van 135
•
Your turntable with radio & cassette is now ready for use.
•
To connect headphones to this equipment, use a 3.5mm headphone jack
and plug it into the socket (8) on the front of the equipment.
•
To connect an external device (e.g. amplifier or speaker), use the LINE OUT
slots from the back of the equipment.
•
The display shows the time when it is switched off (standby). To set the
time, press ERP/MEM/TS/CLK-ADJ button and "24HR" is displayed. Press
the Skip up/down button to switch between the 12h and 24h display.
Press the " REP/MEM/TS/CLK-ADJ " button again to confirm. “00:00"
flashes on the display. Use the Skip up/down button to set the hour and
confirm with "REP/MEM/TS/CLK-ADJ" button. Repeat the procedure for
setting the minutes.
NOTE: The clock setting mode will automatically quit if no button is being
pressed in a period of about 10 seconds after pressing the “REP/MEM
/TS/CLK-ADJ “button. The preset time will be re-set completely if dis-
connecting the main power supply. You are recommended to switch the
system into standby mode for convenience usage.
Features
• Variable turntable speed (33, 45, 78 rpm)
• Automatic/manual stop turntable
• Belt-driven system
• Slot-in cassette player
• Direct USB/SD encoding for Turntable, Cassette and Aux-in, Bluetooth
• Auxiliary input for connection of other device (e.g. CD player or MP3 player)
• USB/SD slot for MP3 playback
• Deleting files/tracks on USB and SD
• Digital read-out analog AM/FM radio
• 45 rpm adaptor included
• LCD display with blue backlight
Bekijk gratis de handleiding van Akai ATT-15SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Akai |
| Model | ATT-15SE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17984 MB |
