Akai ATT-15SE handleiding
Handleiding
Je bekijkt pagina 13 van 135
1. You can divide the recording music from AUX to USB/SD track by trace
during encoding.
2. Every time when press the “TS”(track separation) button once during
encoding from AUX to USB/SD, the system will generate a new track and
continuous the recording. The text “ TS “ at LCD display will flashing one
time, it means the unit is creating a new track successfully.
USB AND SD PLAYING
Playback of music in MP3/WMA/WAV/FLAC format via USB device or
memory card
1. Powering ON/OFF the system: Press the POWER button to turn the device
on.
2. Following the illustration below, insert a USB device face up into the USB
port, making sure it is fully inserted. Alternatively, insert a memory card in
the direction of the arrow (as shown on the label next to the memory card
slot), making sure to insert it straight without bending. IMPORTANT:
Connecting the USB device upside down or backwards could damage the
audio system or storage media (USB drive, SD or MMC card). Check to
ensure the direction is correct before connection.
3. Set the function selector to USB/SD mode. (If you have both a USB device
and a memory card inserted, press the MODE button to toggle between
USB and SD mode.) The system will start reading the storage medium
automatically after mode selection and will display the total number of
Bekijk gratis de handleiding van Akai ATT-15SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Akai |
| Model | ATT-15SE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17984 MB |
