Akai AM-100 handleiding
Handleiding
Je bekijkt pagina 10 van 120
Press [ENTER] to view DAB soware version. Press Menu to stop displaying the soware version.
*If there are no operans aer 30 seconds, the display will return to normal.
Preset
1.
Preset Recall
In DAB menu, press [ ] or [ ] stan select “Preset Recall”, then press [ENTER] to tune to the
stored in preset memory. Or press PROG. Buon (11) of the remote control.
Note: If you have not previously stored a preset staon and the preset bu
on is pressed, “Empty preset”
will be displayed.
2.
Preset Store
You may store your preferred DAB stans to the preset stan memories. There are 50 memory presets
in your radio. Presets are remembered by your radio in the event of a power failure.
In DAB menu, select [Preset store] with and , then press [ENTER]. Press the “previous or next”
buons to select a storage space， then press [ENTER] to conm the desired preset number under which
you wil
l store the staon you are currently playing. Press [ENTER] to conrm.
FM Rad
io
Carefully extend the telescopic aerial to its full length.
Auto Scan
1.
Rotate the MODE knob to select “FM Mode”.
2.
Long Press buon, and your radio will scan and stop automacally when it nds a staon of
sucient signal strength.
3.
Aer a few seconds, the display will update. The display will show the staon frequency. If the signal
is strong enough and the staon signal contains RDS data, then the radio will display the staon name.
4.
To nd other staons, press and hold the buon as before.
5.
To scan the FM band in the opposite direcon (high frequencies to low frequencies), press the
buon
and hold for 2 seconds. When the waveband end is reached, your radio will recommence tuning
from the opposite waveband end.
Manu
al Scan
1.
Press the MODE key on the main unit to select “FM Mode’’.
2.
Select FM mode as previously described, if required.
3.
Press or shortly adjust tuning. Each press of the tuning buon will change the frequency
up or down by 50 kHz.
4.
When the waveband end is reached, the radio will recommence tuning from the opposite waveband
end. If no staons are found, please ensure the aerial is extended and test the recepon by doing another auto
scan in a dierent locaon.
Bekijk gratis de handleiding van Akai AM-100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Akai |
| Model | AM-100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 26472 MB |
