Akai ABTS-TK19 handleiding
Handleiding
Je bekijkt pagina 4 van 55
General USB/MicroSD notes
• This unit is equipped with a microSD slot
and USB port t hat can read and play MP3
files stored on standard microSD cards and
USB drives up to 32 GB.
• FAT and FAT32 file system is supported
by this unit.
Never remove microSD cards and USB drives
from the unit during playback, always stop
playback, then press the MODE button to
switch to another mode before removing the
storage to prevent damage to your files and
cards/drives themselves.
If there is a microSD card or USB drive
installed in the unit, when powered on, playback
will automatically start from microSD/USB.
Slight noise during playback pauses is not a
construction defect, it is determined by the
factory presets of the dynamic noise reduction
system.
FM Radio
•
Turn on the device.
•
Press the MODE button repeatedly to select
the FM mode.
•
Press SCAN to automatically scan and
save all available radio stations. The procedure
will take several minutes and cannot be
interrupted.
•
Radio frequency can be set manually using
the numeric buttons on the remote control.
•
Once the search is finished, you can press
the and buttons
to go to a previous or next radio station. Also
you can input the frequency directly using the
numeric buttons on the
remote.
Microphone
•
You can connect a microphone (not
provided) for karaoke or other purposes into
this unit by connecting it to the 6.35mm
microphone input jack. Please do not plug the
microphone when the unit is charging.
•
While connected, you can control the
microphone volume and echo effect by rotating
the corresponding knob on the top panel.
TWS Function
(True wireless stereo technology) TW S technology
enables user to make wireless connection between
two speakers which are same model and compatible
with TWS. In TWS connection, two speakers will be
automatically grouped to be a Stereo-Speaker System
which outputs the left and right channel.
HOW TO ESTABLISH CONNECTION
Notice: Two speakers must be same model and both
compatible with TWS.
1. Please switch on both speakers and select
"Bluetooth" mode;
2. Press and hold PLAY
button (09) on the unit, you
will hear a "beep". It becomes the main speaker (left
channel), which will automatically search and connect
with another speaker
(right channel). After connection, you will hear a
"beep";
3. Connect mobile phone or Bluetooth player to the
speaker by Bluetooth. After connection, you can play
music with the TWS Stereo- Speaker System.
4. After connection, press and hold PLAY button (09)
on either unit to disconnect TWS. You will hear a
"beep" while
disconnecting successfully.
TWS function operates in TWS m ode, manipulations
to the main speaker will be simultaneously affected in
another speaker. For example, volume adjustment,
previous and next song selection, play and pause,
power on and off.
Note:
- If the 2 loudspeakers are not paired, switch off both
devices and repeat steps 1, 2 and 3.
- The TW S function only works between equal
speakers or with other speakers that use the same
micro-processor or solution.
Maintenance and care
•
Switch off the unit, unplug from the power
supply. The outside of the appliance can be
cleaned with a s lightly damp cloth.
Accessories
•
1 x AUX cable
•
1 x Remote control (with battery)
•
1 x Instruction manual
•
1 x Speaker
•
1 x Charging cable
Bekijk gratis de handleiding van Akai ABTS-TK19, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Akai |
| Model | ABTS-TK19 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8337 MB |
