AJA KONA 1 handleiding
Handleiding
Je bekijkt pagina 45 van 98
KONA Capture, Display, Convert v16.2 45 www.aja.com
will be listed in green. This shows that active processing of the video is taking
place (format change and possibly up- or down-conversion).
SDI 2
Same parameters as SDI Output 1, but are applied to the KONA card SDI Output 2
(SDI output BNC 4).
HDMI Screen
The HDMI screen is used to configure the KONA card's HDMI Output signal.
HDMI Output
Source
• Auto - Automatically sets the HDMI output format, based on the input or
selected format.
• Primary - Selects the framebuffer format for output.
• Secondary (KONA 4 in UFC mode) - Sets the HDMI output to the Converted
Format (set in the Format screen) for up/down/cross-conversion).
• 4K Quarter (KONA 5, KONA 4 in 4K mode) - Sets the HDMI output to
downconvert to HD.
NOTE: The 4K Transport setting on the SDI Out screen also affects the KONA HDMI
output signal, even if the SDI inputs are not being used. A SMPTE 2Si setting
is required for UltraHD/4K HDMI output. Other 4K Transport settings will
downconvert HDMI output to HD or 2K.
Bekijk gratis de handleiding van AJA KONA 1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AJA |
| Model | KONA 1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20265 MB |
