AJA IPR-10G2-SDI handleiding
Handleiding
Je bekijkt pagina 6 van 74
10 GigE IP Mini-Converters SMPTE 2110 IP Transmit/Receive v2.5 6 www.aja.com
Pre-Built System Configuration Modes for IPR-10G2
There is a set of pre-built system configuration modes, or "system modes,"
available from the System Mode control on the Config page of the IPR-10G2 web
UI. These pre-built System Modes are designed to save you time so that you can
get your unit up and running quickly.
Each System Mode is built for a specific type of use case, taking into account
factors such as network conditions, protection requirements, timing, and latency
considerations.
Please see "System Modes" on page 41 for more detailed information.
NOTE: The System Modes are available only for the IPR-10G2-SDI and IPR-10G2-HDMI
units; they are not needed on the IPT-10G2-SDI and IPT-10G2-HDMI units since the
transmitter's functionality is simpler.
On a high level, the five pre-built System Modes are described as follows:
PTP Low Latency
• Appropriate under ideal network conditions
• Fastest method of moving data through the device (does not require signal
processing)
• Provides the least amount of packet-level and frame-level protection
• Remote sender and AJA IPR-10G2 receiver are locked to PTP
PTP Protected
• Provides the highest amount of packet-level and frame-level protection,
including redundancy support with ST 2022-7
• Maximum latency due to longer signal processing chain
• Remote sender and AJA IPR-10G2 receiver are locked to PTP
Gateway
• Bridges between PTP and Reference Video timed domains
• Provides frame-level protection
• Moderate latency due to signal processing chain
Gateway Protected
• Bridges between PTP and Reference Video timed domains
• Provides the highest amount of packet-level and frame-level protection,
including redundancy support with ST 2022-7
• Maximum latency due to longer signal processing chain
Asynchronous
• Intended as a setup environment or troubleshooting and demo tool
• Not for production
• When unable to lock to PTP or when experiencing problems with Reference
In, uses Video In to verify that video is being received from source address
• Provides frame-level protection (no packet-level protection)
• Moderate latency due to signal processing chain
Advanced
Unlike the five pre-built System Modes just described, each of which are "safe,"
Advanced Mode does not guard against a user applying contradictory settings
that could provide unpredictable results.
Bekijk gratis de handleiding van AJA IPR-10G2-SDI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AJA |
| Model | IPR-10G2-SDI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10890 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Gewicht | 300 g |
| Breedte | 128.78 mm |
| Diepte | 23.88 mm |
| Hoogte | 128.52 mm |
