AJA IPR-10G2-SDI handleiding
Handleiding
Je bekijkt pagina 17 van 74
10 GigE IP Mini-Converters SMPTE 2110 IP Transmit/Receive v2.5 17 www.aja.com
4. Connect the USB cong cable to the computer running eMini-Setup.
5. Open eMini-Setup and congure the device’s network settings.
NOTE: DHCP is enabled by default, and if the device is connected to a DHCP server the IP
address field will populate.
6. Enter the IP address into a browser window. The web UI for your AJA device
will display.
7. Use the web UI to fully congure and control your AJA Device.
Hardware Installation
Temperature of Unit
The 10 GigE IP Mini-Converters pack an unprecedented feature set into the mini
converter box. As a result, the unit uses approximately 13 watts of power. It will be
very warm to the touch, which is normal. The unit is engineered to operate across
the full temperature range, from 0 to 40 degrees C.
Access to Air for Proper Cooling
For highest reliability, the mini converters rely on convection cooling instead
of using a built-in fan. Therefore, when installing the units, mount in a
location where they have access to air for proper cooling. Do not stack the
10 GigE IP Mini-Converters with other mini converters or other powered
equipment.
Number of LAN Connections
Three LAN connections to the unit are not necessarily required on an ongoing
basis. If it is desirable for your installation, after the 10 GigE IP Mini-Converter is
set up, you can access all control parameters through one of the Media LANs with
the appropriate network configuration. See "Networking Option – Using Only the
Media LAN Port for Control and Media Settings" on page 27 for more information.
Settings Retained
The current 10 GigE IP Mini-Converter's configuration settings are retained even
when powered off, so subsequent installations for an identical decoding or
encoding session can be done with the following simple steps:
1. Apply power to the 10 GigE IP Mini-Converter.
2. Connect the unit to your network using the Control LAN, Media LAN 1 and
Media LAN 2 and connect the unit’s inputs and outputs.
REST API Documentation
AJA’s REST automation API provides a platform from which you can issue
commands to an AJA device’s internal web server, allowing remote systems
the ability to control AJA embedded or networked devices. With this control
framework, you can build integration and automation scripts, using any scripting
language, allowing you to take full advantage of the device’s functionality.
This documentation is available at the following link:
https://gitlab.aja.com/pub/rest_api
Bekijk gratis de handleiding van AJA IPR-10G2-SDI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AJA |
| Model | IPR-10G2-SDI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10890 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Gewicht | 300 g |
| Breedte | 128.78 mm |
| Diepte | 23.88 mm |
| Hoogte | 128.52 mm |
