AJA IPR-10G2-HDMI handleiding
Handleiding
Je bekijkt pagina 7 van 73
IPTR-10G2-Series Mini-Converters SMPTE 2110 IP Tx/Rx v2.5r1 7 www.aja.com
Characteristics of Advanced Mode include the following:
• For custom configurations
• Has no native default settings
• Can be used to iterate and expand upon the five pre-built System Modes
described above
• Provides free-range access to:
• Video Clock Mode
• Packet Protection Mode
• Frame Sync Mode
• System Mode
• Audio Sample Rate Converter
• When selected, Advanced Mode will retain the settings of the previously
selected System Mode, and the user may proceed to customize settings as
desired. This means that any of the System Modes can be modified using
Advanced Mode and then saved as a Preset on the Presets screen.
NOTE: When working with Advanced Mode, if the configuration settings become
problematic, you can always "revert" to one of the five pre-built System Modes to
get the unit running again with established internally compatible settings.
IPTR-10G2-Series Mini-Converters Features
IPT-10G2-SDI
• SMPTE ST 2110 audio, video transmitter including support for ST 2022-7
• Essence support: SMPTE 2110-10, 2110-20, 2110-30
• Rugged, quiet, fanless design
• 2x 10 GigE SFP+ cages for media LAN with status light (for media transport,
control, and timing input), SFP+ modules not included)
• 1x 1 GigE RJ45 socket for control LAN with status light
• Complete control interface on any web browser from a built-in web server
• Customizable control with AJA REST API
• Control supported over dedicated management Ethernet port and in-band
over media ports
• NMOS Rx discovery and control according to standards IS-04 v1.3 and IS-05
v1.1
• Ember+ control (no discovery, control only)
• AJA REST API control (discovery via SSDP or MDNS)
• LLDP (Link Layer Discovery Protocol)
• 1x 3G-SDI Input
• 1x 3G-SDI Loop Out
• Support for HD up to 1080 60p, YCbCr 4:2:2
• Concealment of errors due to packet loss
• Full 10-bit pixel processing pipeline
• Embedded SDI audio input (up to 16 channels)
• 2x RCA analog audio input
• 1x BNC Reference Out, allowing incoming baseband sources to be locked to
PTP timing
• Frame Sync
• 1x mini-USB port for initial network configuration with AJA eMini-Setup
software (alternative setup method)
Bekijk gratis de handleiding van AJA IPR-10G2-HDMI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AJA |
| Model | IPR-10G2-HDMI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11089 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Gewicht | 300 g |
| Breedte | 128.78 mm |
| Diepte | 23.88 mm |
| Hoogte | 128.52 mm |
