AJA IPR-10G2-HDMI handleiding
Handleiding
Je bekijkt pagina 16 van 73
IPTR-10G2-Series Mini-Converters SMPTE 2110 IP Tx/Rx v2.5r1 16 www.aja.com
2. Using the AJA eMini-Setup application running on the host computer that is
directly connected to the 10 GigE IP Mini-Converter via USB.
Initial Setup By Web Browser
NOTE: Chrome and Firefox are the preferred web browsers for control on Windows.
Safari is the preferred web browser for control on macOS. Other web browsers
may work, but AJA cannot guarantee consistent operation for all web browsers or
web browser versions.
IPTR-10G2-Series Mini-Converters require a network connection for initial
configuration, control and firmware updates. IPTR-10G2-Series Mini-Converters
are shipped from the factory with DHCP enabled, and support automatic network
discovery via SSDP and MDNS.
To Set Up the Unit with a Web Browser
1. Connect the 10 GigE IP Mini-Converter Control Port to the intended
network with an Ethernet cable.
2. The intended network’s DHCP Server will assign an IP address and the 10
GigE IP Mini-Converter will join that network.
3. Locate and connect to the AJA 10 GigE IP Mini-Converter.
Windows PC Host
A. Open Windows Explorer.
B. Navigate to the Network.
C. Click on the Network to enumerate network devices.
D. Search for either “IPT-10G2,” "IPR-10G2," or the device’s Serial Number.
E. Double-click on the intended 10 GigE IP Mini-Converter. The host machine
web browser will launch and display the web UI for the device.
macOS Host
A. Go to System Preferences > Sharing and turn on File Sharing.
B. Open the Finder Window.
C. Navigate to Shared > All…
D. Click on All… to enumerate network devices.
E. Search for either “IPT-10G2,” "IPR-10G2," or the device’s Serial Number.
F. Double-click on the intended 10 GigE IP Mini-Converter. The host machine
web browser will launch and display the web UI for the device.
NOTE: If the above does not work, then you will need to download and install an MDNS
browser to assist with discovering network devices on a macOS host.
Initial Setup By AJA eMini-Setup
1. Acquire AJA eMini-Setup (version 2.1) from the AJA website for either
macOS or Windows:
https://www.aja.com/family/software#eminisetup
2. Install eMini-Setup:
A. Unzip the Installer.
B. Run the .dmg file on macOS or the .msi file on Windows.
3. Connect Power to your AJA Ethernet equipped Converter.
Bekijk gratis de handleiding van AJA IPR-10G2-HDMI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AJA |
| Model | IPR-10G2-HDMI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11089 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Gewicht | 300 g |
| Breedte | 128.78 mm |
| Diepte | 23.88 mm |
| Hoogte | 128.52 mm |
