AJA DRM2 handleiding
Handleiding
Je bekijkt pagina 6 van 30
DRM2 Mini-Converter Rack-Mount Frame Manual v1.0 6 www.aja.com
Figure 4. Active Faceplate
DC Power Connector for fans
The Active Faceplate allows for a high-density installation of AJA’s most powerful
Mini-Converters, without concern for heat soak. The Active Faceplate connects to
the DRM2 +5V DC power supply using any available DC power connector found
on the DRM2's DC Power Harness, although one is provided near the middle of
the harness for this use.
If the ambient temperature is under 30C, an Active Faceplate is recommended if
power consumption exceeds 100W. If the ambient temperature is over 30C, then
an Active Faceplate is recommended if power consumption exceeds 75W. Please
consult the Tech Specs of your Mini-Converters to calculate expected power
consumption.
Figure 5. Active Faceplate Fans and Power Connector
DC Power Connector for fans
Active Cooling
Fans ( 4 total)
Active Faceplate
Both DRM2 faceplate types have four "inner" mounting holes for the faceplate, in
addition to the four "outer" 19" rack-mounting holes for the DRM2 frame.
Figure 6. Separate faceplate and rack mount screw holes
Rack Mount
“Outer” Screw Holes (4)
Faceplate Mount
“Inner” Screw Holes (4)
Both sets of holes may use the same size 19" rack screws.
NOTE: 19" rack rails vary in design, so use the fasteners which your rack provides.
This design allows removal and replacement of the faceplate without removing
the DRM2 from the rack. This allows easy access to Mini-Converters and their
cabling from the front. The above example shows all Mini-Converters connected
to the DC Power Harness.
Bekijk gratis de handleiding van AJA DRM2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AJA |
| Model | DRM2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8254 MB |
