Aiwa ZENKAISUI EVO 6 AVC-640 handleiding
Handleiding
Je bekijkt pagina 17 van 108
ENGLISH
screen is always displayed, please clean the dust on the dust sensor lamp in time.
(IMAGE 18)
Note: If there are other faults, special tools are required. Also, to avoid hazards, it
should be replaced by professionals from the manufacturer, its maintenance
department, or similar departments.
ALARM ALERTS
•
Disconnection Error: The vacuum cleaner suddenly shuts off and cannot be
turned on. The digital tube shows "E1".
•
Charger Overvoltage: The charger voltage is too high (>36.3V), which causes
the vacuum cleaner to be unable to charge. The digital tube shows "E2".
•
Unloaded Discharge: The vacuum suddenly turns off when not in use.
•
Main Motor Short Circuit: The vacuum cleaner suddenly shuts off due to a short
circuit in the main motor. The digital tube shows "E3".
•
Second Level Overload of the Main Motor: The vacuum cleaner suddenly
shuts off due to excessive current in the main motor. The digital tube shows
"E5".
•
First Level Overload of the Main Motor: The vacuum cleaner suddenly shuts
off due to excessive current in the main motor. The digital tube shows "E6".
•
High/Low Flush Temperature: The vacuum cleaner suddenly shuts off due to
an abnormal temperature during use.
•
Serial Communication Error: The vacuum cleaner cannot be turned on due to a
serial communication problem. The digital tube shows "E7".
•
NTC (Open Circuit) Error: The vacuum cleaner suddenly shuts down due to a
problem with the temperature circuit. The digital tube shows "E8".
•
Overheating and Low Temperature at Flush: The vacuum cleaner suddenly
shuts off due to extreme temperatures during use. The digital tube shows "E9".
•
First Level Protection when the Floor Brush is Locked: The floor brush
automatically stops when locked. The digital tube shows the floor brush logo
flashing.
•
Air Duct Lock Protection: The vacuum cleaner is operating normally, but the
digital tube shows that the lock logo flashes cyclically to indicate a blockage in
the air duct.
Note:
1. The charging error is eliminated after the charger is removed.
2. The discharge error (except for no-load shutdown) shows a 10-second release
or press the ON/OFF button to release.
3. The serial communication error and the NTC error show a 50-second release.
RECYCLING OF ELECTRICAL AND ELECTRONIC
EQUIPMENT
This symbol indicates that, in accordance with applicable regulations,
the product and/or battery must be disposed of separately from
household waste. When this product reaches the end of its useful life,
you must remove the batteries/accumulators and take it to a
collection point designated by the local authorities.
For detailed information on the most appropriate way to dispose of
their electrical and electronic equipment and/or batteries, the
consumer should contact the local authorities. Adherence to the
above guidelines will help protect the environment.
Bekijk gratis de handleiding van Aiwa ZENKAISUI EVO 6 AVC-640, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Aiwa |
| Model | ZENKAISUI EVO 6 AVC-640 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 11492 MB |
