Handleiding
Je bekijkt pagina 9 van 44
ENGLISH
BEFORE FIRST USE
Before you use the appliance and accessories for the first time, make sure that all
packaging has been removed, and thoroughly clean the parts that come into contact
with food.
PRODUCT ASSEMBLY
• Assemble the sealing ring and blades. (Picture 1)
• Put on the plastic jar base clockwise. (Picture 2)
• Place the plastic jar onto the motor unit.
INSTRUCTION FOR USE
1. Cut the fruits or vegetables into pieces, then put them into the jar with some
water put the lid on it.
2. Put the plastic jar on the motor unit, and make sure the plastic jar is properly
assembled.
3. Plug in the appliance and turn the speed knob to which speed you need, Speed
“1” for low speed, speed “2” for high speed, “P” for pulse function.
4. Rotate the speed knob to speed 0, unplug the appliance and wait until the
blades come to a complete stop.
5. If the jar is picked up during use, the blender will stop working. And if you want
to restart, turn the speed knob to "0" first, then select the desired mode
BLENDING WITH FUNCTION BUTTON
*Pulse function
For ice crushing and short, powerful impulse moments.
Rotate the speed knob to speed “P” and hold it for 3 seconds, repeat the operation
until you obtain the desired result.
*Safety protection system
- The blender has a safety protection system. It will stop the process
automatically when the motor is overheated. If the blender stops, switch off and
unplug the appliance from the power supply, and let it cool down for at least 20
minutes.
Note:
- Pre-cut the food into pieces of 2 or 3 cm.
- Do not exceed the maximum capacity.
- Place your hand on the top of the lid to secure the appliance when in function.
- Do not blend the dry ingredients.
- Do not use the appliance for more than 1 minute. Cool down the appliance to
room temperature before switching it on again.
GENERAL
For better results: please make sure that the quantity of ingredients fully covers the
blade while chopping solid food.
CARE AND CLEANING
• Before cleaning, unplug the appliance.
• Remove the jar from the motor body.
Bekijk gratis de handleiding van Aiwa Saberu 1500 ATB-1500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Aiwa |
| Model | Saberu 1500 ATB-1500 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 4191 MB |
