Aiwa MIZUSUI PRO Wet & Dry AFC-800 Handleiding (80 Pagina's)

Handleiding

ENGLISH

DAILY STORAGE

After daily cleaning, remove the roller brush components and accessories, and place

them in the designated position on the base, following the direction shown in Figure

5-A. The entire machine should be placed in a well-ventilated area, avoiding direct

sunlight or humid conditions. Clean the exterior of the machine with water or a

neutral detergent, making sure to wring out the cloth before use. Avoid letting water

get into the internal components of the ﬂoor scrubber, as shown in Figure 5-B. Before

cleaning, ensure the machine has stopped working and is not in charging mode. After

cleaning, keep the machine out of direct sunlight and away from moisture.

Common failures

Possible causes

Workaround

The machine cannot be

turned on, and the

indicator light does not

light up

The product is dead or

underpowered

Please charge the product

before use

The handle indicator

blinks in turn

The roller is tangled in hair

Clean the rollers and turn

the system back on

Work for 1 second to stop,

the ground brush red light

Waste water tank removal

Put the waste water tank

back into the machine

The machine is stopped

during the operation, and

the ground brush lights

up red

The waste water tank is

full

Clean the waste water

tank and put it back on

the machine

The machine does not

stop regularly during self‐

cleaning

The adapter is not

connected

Please check and connect

it

The charging light does

not ﬂas

The charger and the

connectornare not well

connected

Please check and connect

it

Bekijk gratis de handleiding van Aiwa MIZUSUI PRO Wet & Dry AFC-800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.